28,95 x 9,00 m "Longliner"

Newbuilding	Project NLL-0406
Type	Longliner fishing vessel
Material	The vessel to be built of steel completely welded with two continuous decks, main deck and upper deck. Wheelhouse to be constructed of Aluminium.
Dimensions	28,95 m L.o.a 26,50 m L.p.p 9,00 m beam 4,25 m depth to main deck 6,65 m depth upper deck 0.50 m frame spacing: 0,50 m
Main engine	Caterpillar 3508B or similar, approx. 870 Hp, four stroke diesel engine, turbo charged withintercooler and fresh water cooling. Main engine to be based operating with MDO fuel oil IF 5.
Speed	Trial speed apx. 10 knots in ballast condition.
Red. gear	The main engine to be connected to reduction gear, Heimdal, Mekanord or similar.
Propeller	CP propeller, nickel-aluminium, 4 blade, diam. 2200 mm, speed: 250 rpm.
Aux. engines	Two (2) Caterpillar, 115 kVA or similar driving AC-generator, 3 x 380V, 50 Hz at 1500 rpm. The two auxiliary generator sets, are to be prepared for continuous parallel running. The aux. engines to be equipped for running on MDO fuel oil IF5
Fish hold	220 m3 = 150 x 660 L fish tubs - Fish hold is insulated for cooling. Cooling system Bitzer 2N-2Y compressor and KUBA, 2 fan coolers, connected to R404 cooling medium. Cooling +20°C to +1°C in 8 hours. The system is to be automatic to keep a temp. of +1°C in the fish hold.
Bait room	Yes.
Autoline	Mustad, BFG or similar autoline system is not included in the price as it is "Buyers" supply.
Tank cap.	Fuel oil 70 m3 – Water ballast 20 m3 – Fresh water 20 m3
Hatches	MacGregor type. Hatch covers of seawater resistant aluminium. - All movable parts incl. securing devices of stainless steel. - Built-in lifting devices. - All hatch covers exposed to open deck or refrigerated areas to be insulated.
Rudder	Flap rudder, “Barkemeyer type BRB 14-25-12" (or similar).
Steering gear	Steering engine “Tenfjord SR 562” or similar.
Deck equip.	High pressure hydraulic deck machinery. Longline winch and Anchor windlass: Rapp, Karmoy or similar.
Processing	- The fish processing area to be equipped for bleeding and gutting of Cod, Haddock and Saith. It is to be designed and fitted in co-operation with the buyer. - Processing equipment of stainless steel for an amount of EUROS 70.000 is included. - Sides and ceilings to be insulated with ship type rockwool and covered with water-resistant (bathroom) panels, white type. All corners, etc. to be covered with stainless steel angle.
Accommod.	For 14 persons. - Ventilation system from “Nyborg” or similar in accommodation. - The ship is to be heated by hot water central heating system “Rafhitun RH-113L” or similar.
Electronics	Fish finding, communication & navigation equipment for EUROS 110.000 included.
Various	- Oil separator from “Alfa-Laval”, Westfalia or similar. - Lubrication oil separator “Alfa-Laval”, Westfalia or similar. - Sea-water/fresh-water cooling system: pumps from Allweiler, P.G., Thune Eureka or similar. - Air compressors make “Atlas Copco” or similar. - Automation system for machinery plant: The vessel to be equipped with monitoring and automation according to the class notation E0, but not formally E0 classed. - The vessel shall comply with rules & regulations of Classification Society and Maritime Authority incl. MARPOL (international convention for the Prevention of the Pollution from Ships), IMO, Fishing vessel inspection regulation, Ship Electrical Standard, Communication regulations, Health & Safety Regulations, European Union Rules and regulations pertaining to vessels processing fish for EU, etc..
Shipyard	High quality shipyard in North Europe.
Delivery	ca. 11-12 months delivery time.
Price idea	Contact us!